Vitocal 262-A

Cost effective and energy saving use of heat from the indoor air, outdoor air or extract air for DHW heating

The Vitocal 262-A DHW heat pump uses heat from the indoor air, outdoor air or extract air for cost effective and energy saving DHW heating.

The Vitocal  262-A DHW heat pump is an ideal addition to the existing heating system. In the new Vitopearlwhite design, the appliance is also suitable for installation near the living space. The wall mounted version is particularly compact. The Vitocal  262-A provides low cost and energy saving DHW heating. To do so, the universal unit extracts heat from the outdoor air, as well as from the ambient air and extract air indoors.

Typical applications include laundry rooms, bakeries or server rooms, where a large amount of heat is regularly produced.

Special features of the Vitocal  262-A

Three versions to cater for every need

For mono mode operation, the heat pump is available without an internal indirect coil (type T2E-ze). A DHW cylinder with 300  litre capacity is integrated. Alternatively, the hybrid version with an integral indirect coil (type T2H-ze) can be selected. This is recommended for retrofitting and upgrading existing systems.

The intelligent control unit then always selects the optimum operating mode – heat pump or heat generator – taking into account energy prices and primary energy factors. The Vitocal  262-A preheats the water in the integral 300  litre cylinder. The existing heat generator is only used for reheating if required. This ensures maximum DHW convenience at all times.

In the space saving wall mounted version (type T2W-ze), DHW heating is provided by an adjacent DHW cylinder (160 to 500  litre capacity).

Dry immersion heater

The electric version (type T2E-ze) is factory-fitted with a dry immersion heater. The hybrid version with indirect coil (type T2H-ze) can be retrofitted with an immersion heater if required.